Comments on: Linux on Microblaze HOWTO (part III) https://billauer.se/blog/2011/08/linux-microblaze-howto-tutorial-primer-3/ Anything I found worthy to write down. Thu, 26 Mar 2026 13:15:15 +0000 hourly 1 http://wordpress.org/?v=3.1.2 By: sree https://billauer.se/blog/2011/08/linux-microblaze-howto-tutorial-primer-3/comment-page-1/#comment-952 sree Sun, 08 Jun 2014 13:05:34 +0000 https://billauer.se/blog/?p=1639#comment-952 Hi, I have taken Hard emac in my hw design.After making the image for the corresponding dts and porting to target board , I am not able to ping to board IP shown at serial port console.Kindly help on this issue. regards, Sree Hi,

I have taken Hard emac in my hw design.After making the image for the corresponding dts and porting to target board , I am not able to ping to board IP shown at serial port console.Kindly help on this issue.

regards,

Sree

]]> By: eli https://billauer.se/blog/2011/08/linux-microblaze-howto-tutorial-primer-3/comment-page-1/#comment-799 eli Thu, 27 Sep 2012 14:18:25 +0000 https://billauer.se/blog/?p=1639#comment-799 This is the directory you should have created yourself, following the instructions just before. What is the missing part? This is the directory you should have created yourself, following the instructions just before. What is the missing part?

]]> By: dyscid https://billauer.se/blog/2011/08/linux-microblaze-howto-tutorial-primer-3/comment-page-1/#comment-798 dyscid Thu, 27 Sep 2012 01:53:29 +0000 https://billauer.se/blog/?p=1639#comment-798 Read you blog,something can't read,under "Open a command shell (Project > Launch Xilinx Shell if you like), change to this directory and go:",it can't show.Could I get it? Thanks! Read you blog,something can’t read,under “Open a command shell (Project > Launch Xilinx Shell if you like), change to this directory and go:”,it can’t show.Could I get it? Thanks!

]]>