Comments on: Download a Linux distribution for Xilinx’ Microblaze https://billauer.se/blog/2011/09/linux-fpga-distro-microblaze-spartan-xilinx/ Anything I found worthy to write down. Thu, 26 Mar 2026 13:15:15 +0000 hourly 1 http://wordpress.org/?v=3.1.2 By: Vlad https://billauer.se/blog/2011/09/linux-fpga-distro-microblaze-spartan-xilinx/comment-page-1/#comment-924 Vlad Wed, 19 Feb 2014 18:10:16 +0000 https://billauer.se/blog/?p=1871#comment-924 Hello, can you help me to configure the microblaze processor in Nexys 4 FPGA Board Hello, can you help me to configure the microblaze processor in Nexys 4 FPGA Board

]]> By: eli https://billauer.se/blog/2011/09/linux-fpga-distro-microblaze-spartan-xilinx/comment-page-1/#comment-915 eli Sat, 25 Jan 2014 17:34:16 +0000 https://billauer.se/blog/?p=1871#comment-915 Well, I would suggest that you took a look on the Microblaze tutorial on this site: https://billauer.se/blog/2011/08/linux-microblaze-howto-tutorial-primer-1/ As for a Linux kernel, I don't expect any significant differences between Microblaze processors, regardless of the FPGA they are running on. So the procedure should be more or less as described in the tutorial. The boot will be different, and that's board specific, so I can't help you much with that, unfortunately. Well, I would suggest that you took a look on the Microblaze tutorial on this site: https://billauer.se/blog/2011/08/linux-microblaze-howto-tutorial-primer-1/

As for a Linux kernel, I don’t expect any significant differences between Microblaze processors, regardless of the FPGA they are running on. So the procedure should be more or less as described in the tutorial. The boot will be different, and that’s board specific, so I can’t help you much with that, unfortunately.

]]> By: Reddex https://billauer.se/blog/2011/09/linux-fpga-distro-microblaze-spartan-xilinx/comment-page-1/#comment-914 Reddex Sat, 25 Jan 2014 16:58:43 +0000 https://billauer.se/blog/?p=1871#comment-914 Hello Eli billauer , I have a Nexys 4 FPGA Board . I have prepared Microblaze Softcore to put it into FPGA . I'm searching linux kernel to porte it with my Microblaze. Can you help me to choose one that is compatible with Xilinx FPGA architecture. Best regards Hello Eli billauer ,
I have a Nexys 4 FPGA Board .
I have prepared Microblaze Softcore to put it into FPGA .
I’m searching linux kernel to porte it with my Microblaze.
Can you help me to choose one that is compatible with Xilinx FPGA architecture.

Best regards

]]>